Spectrum Control offers state-of-the-art Multi-Channel Amplifiers used in demanding military frequency calibration systems. These 2, 3, and 4 channel modules are all phase matched, amplitude matched and offer both single and multiple path logic.
These units allow the engineer to either distribute an amplified signal to multiple ports, or measure the amplified output from up to 4 auxiliary ports.
Test Parameter | Specifications |
---|---|
Frequency Band | 2.0 Ghz to 8.0 GHz |
Receive Gain | 13 dB |
CAL Path Gain | 21 dB |
Noise Figure | 9 dB |
1 dB Compression | +9 dBm |
Single-Tone Spurious free dynamic range | 45 dB |
Phase Tracking Delta (Electrical Degrees) | 12° at any frequency |
Amplitude Tracking (Channel to Channel) | ±2 dB Maximum Variation Between Channels |
Out Of Band Rejection (Output relative to Input) | 60 dB |
Reverse Isolation (Switches in Through Positions) | 40 dB |
Channel to Channel Isolation | 60 dB |
Switching Speed (50% TTL to 90%/10% RF) | 200 nsec |
VSWR | 2.0:1 |
Switching Isolation (ON to OFF) | 50.0 dB |
DC Power | |
+6.5 volts +3.3 volts -15.0 volts |
525 mA 250 mA 50 mA |
Test Parameter | Specifications |
---|---|
Frequency Band | 500 MHz to 2000 MHz |
Receive Gain | 16 dB |
CAL Path Gain | 10 dB |
Noise Figure | 8 dB |
1 dB Compression | +10 dBm |
Single-Tone Spurious free dynamic range | 45 dB |
Phase Tracking Delta (Electrical Degrees) | 12° at any frequency |
Amplitude Tracking (Channel to Channel) | ±2 dB Maximum Variation Between Channels |
Out Of Band Rejection (Output relative to Input) | 50 dB |
Reverse Isolation (Switches in Through Positions) | 40 dB |
Channel to Channel Isolation | 60 dB |
Switching Speed (50% TTL to 90%/10% RF) | 200 nsec |
VSWR | 2.0:1 |
Switching Isolation (ON to OFF) | 50.0 dB |
DC Power | |
+6.5 volts -15.0 volts |
250 mA 50 mA |